XMC™

cancel
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Recent discussions

Sort by:
User15370
XMC™
Hello.I am working on a simple pulse generator using Dave App PWM_CCU8. The configuration of one of these slices is:- Channel 1 direct output, passive... Show More
User20456
XMC™
Hi, I'm using Dave 4 to implement a 32 bit counter, that counts the waveform generated by a PWM. I need the 32 bit counter count in both directions: f... Show More
Michael_K
XMC™
Hello everyone, For one application I want to use 2 TLE493D Hall sensors. Arduino 1.8.15 1. Some time ago I used a XMC 2Go with the TLE493D library v1... Show More
User22848
XMC™
Hi,I am new to EtherCAT and XMC and I was going to use simple IO on XMC4800 Relax Kit V1. I went through the example and was able to successfully cont... Show More
Hannibal3011
XMC™
Hallo ,i have Pulse Sense2go and i want to measure the distance using matlab . I need your help . I have already a programm that measure the velocity ... Show More
BlueSky
XMC™
  Dear Krup,  we would like to know the relationship between the  /CTRIP and /Enable  in the FOC software. /Enable   TP301A.15   on... Show More
MultipleMono
XMC™
Hello! I've been working on implementing PTP on the XMC4700, and I'm close to getting the timestamping setup working.  However, I'm quite puzzled by t... Show More
BlueSky
XMC™
We are using KIT_XMC4400_DC_V1 board, and using PMSM_FOC App from DAvE IED.    We can read the I_V, user_speed_set.  etc.  However, the Inverter Enabl... Show More
User20049
XMC™
Hello everone, We are implementing IEEE 1588 time sync on XMC4700 relax kit, we base on the DAVE example source code named "HTTP_SERVER_RTOS_XMC47". O... Show More
autoUser
XMC™
Dear community members,I have an issue regarding USB on XMC4500 and try to get any support.In our application we are implementing 3 endpoints besides ... Show More