Wi-Fi Combo Forum Discussions
Hi Sir,
As SDK said, BCM943362WCD4 can support max up to 5 STA client when it is in softAP mode. But we found a strange issue see below:
1. BCM943362WCD4 has no problem support 4 STA client at the same time.
2. But when it reach at 4 STA client, the 5th STA client cannot connect to BCM943362WCD4.
3, Even we disconnect all thoses 4 STA client, the 5th STA client still cannot connect to BCM943362WCD4.
Could you pls give the suggestion? Thanks!
James
Show LessHi,
Using wiced_https_get()
Whenever we try to communicate with our server (also tried other server) with a POST we always get response "after" 5 seconds. After a bit of investigation we found out that on the last packet reception it will always timeout (currently 5 seconds, see below code). However, the operation is still successful as we did able to get all the returned content from our server with POST. The main issue is the time as it always timeout on last packet reception. Help will be appreciated. thanks
This is the code of source problem in wicked_https_get() under http.c
rx_result = wiced_tcp_receive( &socket, &reply_packet, 5000 );
PS. Calling the same function wicked_https_get() with GET works fine. No response time issue as we saw with POST
Best Regards,
Aaron
Show LessWe have made JTAG JIG. It was designed such as WICED-SDK-2.4.1\WICED-SDK\Doc\Schematics\BCM9WCD1EVAL1\BCM9WCD1EVAL1_P405
But USB Serial Port Devices was appeared in Device Manager in Win7.
I think, When WICED USB JTAGE Deivces is appeared in Device Manger, Jtag will be doing well
Let me know how to change from USB serial Port device(FTDI2232) to WICED USB JTAG device
Show LessNew user guide just uploaded to the ACKme Networks site which shows how to use the AMW004 "Wallaby" evaluation tools, but it also demonstrates a how easy the ACKme WICED based modules are to use!
Click the image below to download the document or click the following link : http://ack.me/resources/download/231/AUG_MW004E
WICED Wi-Fi ForumsWICED Wi-FiACKme Networks
Show LessHI All,
Any one know how to be TSSI calibration for WICED module via UART port? if yes, would you please sharing the tool to me ?
Thanks,
Best regards,
Evan
Show LessDear All,
Do you have a solution sending video and audio data stream as below.
GainSpan have a demo kit.
Now a days, home security market is growing.
Show Less
TCP Server + softAP
This application uses two ACKme modules each running WiConnect, a serial API that sits on top of WICED, to demonstrate how to create a TCP server + softAP.
Module 1 is a server configured to start the softAP interface and the TCP server feature on boot up.
Module 2 is a client configured to use the wlan interface and the TCP client feature to connect to the Module 1 softAP and TCP server.
Note: The full article and others can be found here: ACKme | How can I create a TCP Server with SoftAP mode?
Module 1 - TCP Server Settings
WiConnect Commands (Module 1) | Description |
---|---|
set softap.auto_start true set softap.dhcp_server true set softap.ssid tcp_server_ap set tcp.server.auto_interface softap set tcp.server.auto_start true set tcp.server.idle_timeout 300 set tcp.server.connected_gpio 22 set tcp.server.data_gpio 21 save reboot | <- softap auto starts on reboot <- DHCP server is enabled <- Set softAP name <- TCP server uses softAP interface <- TCP server auto starts on reboot <- Don't disconnect clients quickly <- GPIO indicates client connection <- GPIO indicates data is available <- Save settings to flash <- Reboot the module |
Example TCP Session
Module 2: Wi-Fi + TCP Client | Module 1: softAP + TCP Server |
---|---|
> set wlan.ssid tcp_server_ap Set OK > save Success > tcp_client 10.10.10.1 3000 [Associating to tcp_server_ap] [Associated] [Connecting: 10.10.10.1:3000] [Connected: 0] 0 > write 0 13 <hello server!> Success | > stream_poll 0 1 > read 0 100 hello server! > stream_poll 0 0@@ |
What to do if OpenOCD failed when downloading the bootloader, application, or DCT?
I was trying to use the readme-MXCHIP example.
and the sentence is: make snip.scan-MXCHIP3162-FreeRTOS-LwIP download run
I have installed the MXCHIP3162 atch and the stlinkv2 patch.
But the result of running the sentence above is always "OpenOCD failed" when Downloading Bootloader, Downloading Application, and Downloading DCT
Please help me
Show Less