imx7s-warp fmac support

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
GrahamS_21
Employee
Employee
25 replies posted 10 likes received 10 replies posted

I have a customer trying to use the iMX7s-warp board, which has a type-1dx module (CYW4343W)

Our latest FMAC driver and firmware supports kernel 4.1.15 which has no MACHINE imx7s-warp

They imported the Yocto meta-layer for the imx7s-warp from another BSP but this overrides the preferred kernel and pulls in 4.1.32 in which then it becomes a kernel source/header file headache for FMAC.

The current Yocto BSPs all support the imx7s-warp ( 4.1.32 up ) and have the bcmdhd and brcmfmac drivers within, the brcmfmac doesn't actually work but as it's close to FMAC as far as I know - it may be a good starting point for a possible port?

Can we provide some guidance on how to enable this feature? for reference this works ok on the iMX7d board, just not the WARP one.

1 Solution
MichaelF_56
Moderator
Moderator
Moderator
250 sign-ins 25 comments on blog 10 comments on blog

Adding skerr_1713761​ from Murata and vnak​ from the CY AE team.

View solution in original post

0 Likes
1 Reply
MichaelF_56
Moderator
Moderator
Moderator
250 sign-ins 25 comments on blog 10 comments on blog

Adding skerr_1713761​ from Murata and vnak​ from the CY AE team.

0 Likes