USB EZ-PD™ Type-C Forum Discussions
Hello Infineon Team,
Thank you for your usual support.
The VBUS_C_CTRL pin of CCG5 is expected to be an open drain output, but in that case, how large is the drain current?
Best regards,
Koki
Show LessHi Team,
We want to build a project for CYPD6127-48LQXI. But in the EZ-PD CCGX Host SDK user guide it is mentioned to use the appropriate version 4.5 or later of PsoC Creator . But we can install only the 4.4 version on the Infineon site.
Kindly provide the installation link for PsoC creator 4.5.
#psocCreator #CYPD612x
Show LessCan you tell me if the USB port still works when PMODE[2:0] is in a suspended state, i.e. FFFF?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/USB-EZ-PD-Type-C/CYUSB3014%E7%9A%84PMODE-2-0-%E7%AE%A1%E8%84%9A%E6%9C%AA%E8%BF%9E%E6%8E%A5/td-p/726840
Show LessHi,
I have question about CCG5's OCP and OVP detection.
CCG5/CCG5C has OCP_TRIP and OVP_TRIP pins that notify the occurrence of OCP and OVP, but can the EC read the occurrence of OCP and OVP via I2C without using these pins?
Or is it only possible to notify EC using the dedicated pin mentioned above?
Also, I would like to understand the specifications of what EC can do via I2C, so it would be helpful if you could point me to the relevant documents.
Best regards,
Koki
Show LessHello!
I'm designing a PD controller with CYPD717140LQXQTXUMA1. There is a COMP pin in the chip , which is an error amplifier output pin.
Where can I find any information, how I should calculate the capacitors and resistor for proper usage?
Br.
Mosso
Show Less
Is there a bridge chip for MIPI CSI2 TX to usb3.0, only found MIPI in Infineon products CSI2 RX to usb3.0 bridge chip.
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/USB-EZ-PD-Type-C/%E6%A1%A5%E6%8E%A5%E8%8A%AF%E7%89%87/td-p/471988
Show LessAfter the computer installs the CY4500 EZ-PD ™ Protocol Analyzer driver and opens the [EZ-PD Protocol Analyzer Utility] the following pop-up window will appear (see the attached picture for details of the content of the pop-up window), please help to see what is the reason and how to solve it, thank you!
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/USB-EZ-PD-Type-C/CY4500-EZ-PD-%E5%8D%8F%E8%AE%AE%E5%88%86%E6%9E%90%E4%BB%AA%E9%A9%B1%E5%8A%A8%E5%AE%89%E8%A3%85%E9%97%AE%E9%A2%98/td-p/467967
Show LessHello, one of our projects needs to use Android system to send I2C commands through the CY7C65211A chip; does CY or a third party have such a reference routine?
We need the code, we need to integrate it with our program.
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/USB-EZ-PD-Type-C/%E5%93%AA%E9%87%8C%E6%9C%89CY7C65211A-USB%E8%BD%ACI2C%E7%9A%84%E4%BE%8B%E7%A8%8B-%E5%AE%89%E5%8D%93%E7%B3%BB%E7%BB%9F%E4%B8%8B/td-p/470247
Show Less