cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD Type-C

Anonymous
Not applicable

Hello,

There are some power supply pins, VSYS, VBUS, VCONN, VDDD, VDDIO in CCG3.

Could you tell me the power up sequence for those pins if those pins is used for input?

Best regards,

0 Likes
1 Solution
ShifangZ_26
Moderator
Moderator

Hi Takeshi,

There are no critical power sequence base for those power pins. You could power anyone of them first and then after others. For Best practice,  recommend you VSYS first and then others. Since this is follow firmware default setting. If your design cannot meet this, it is fine.

Best Regards,

Lisa

View solution in original post

0 Likes
1 Reply
ShifangZ_26
Moderator
Moderator

Hi Takeshi,

There are no critical power sequence base for those power pins. You could power anyone of them first and then after others. For Best practice,  recommend you VSYS first and then others. Since this is follow firmware default setting. If your design cannot meet this, it is fine.

Best Regards,

Lisa

View solution in original post

0 Likes