PSoC creator "Projects with Outdated Devices"

Announcements

Live Webinar: USB-C adoption. Simple & Cost-efficient solutions | April 18th @9am or 5pm CEST. Register now !

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
rugajjar
Level 1
Level 1
First like given First reply posted First question asked

Hello.

I tried to open the USB PD CCG example source code project file with PSOC Creator 4.4 for USB PD testing.

But it got the error like " Projects with Outdated Devices" 

rugajjar_0-1658951005796.png

Please help me overcome this issue ASAP.

Also, here are the list of errors when project is built & compiled

rugajjar_1-1658951973436.png

Much much appreciated!

Thank you.

0 Likes
1 Solution
Pranava_YN
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi,

May I know where you got this project from?

It looks like the wrong device has been selected in the Device selector.

Please go to Projects>> Device selector in the PSoC Creator and verify if CYPD5126 is selected. If not please select the right device

PranavaYN_0-1658988448257.png

Also, please share this project if possible so that we can verify it at our end.

Best regards,
Pranava

View solution in original post

3 Replies
Pranava_YN
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi,

May I know where you got this project from?

It looks like the wrong device has been selected in the Device selector.

Please go to Projects>> Device selector in the PSoC Creator and verify if CYPD5126 is selected. If not please select the right device

PranavaYN_0-1658988448257.png

Also, please share this project if possible so that we can verify it at our end.

Best regards,
Pranava

Hi Pranava,

 

Thanks for your reply. 

In project -> device selector, I don't see CYPD5126-40LQXI device. 

Also, I see incompatible symbol on various components of schematic design.

rugajjar_0-1659021265253.png

Since it is company project, I need to ask management if I can share it.

Your help is appreciated.

Thanks. 

 

0 Likes
Pranava_YN
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi,

 

Please install Host SDK (https://www.infineon.com/cms/en/design-support/tools/sdk/usb-controllers-sdk/ez-pd-host-software-dev...)  and then check the device selector to enable the device.

Best regards,
Pranava
0 Likes