- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello everyone
Why is the CYPD3120 no more available in SDK v3.4 ? Is there somewhere a firmware example available ?
I would like to program the CYPD3120 with the MiniProg3 and i can't find any example...
I have also tried to install the old SDK v3.0.1 (where the CYPD3120 was available) but here is the problem that for the installation it requires the Cypress Document Manager and it isn't available any more.
Thank you for the support.
Regards
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello ,
CYPD3120 firmware project is still available in SDK3.0.2. You could get it firmware project from the link: https://www.cypress.com/documentation/software-and-drivers/ez-pd-sdk-v302-ccg2-all-applications-ccg3...
If you have been installed it, you are not need install the SDK again. If you cannot be installed, please kindly let me know the screen shot of the error.
Meanwhile, the SDK3.0.2 using PSoC Creator 3.3 only.
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello ,
CYPD3120 firmware project is still available in SDK3.0.2. You could get it firmware project from the link: https://www.cypress.com/documentation/software-and-drivers/ez-pd-sdk-v302-ccg2-all-applications-ccg3...
If you have been installed it, you are not need install the SDK again. If you cannot be installed, please kindly let me know the screen shot of the error.
Meanwhile, the SDK3.0.2 using PSoC Creator 3.3 only.
Best Regards,
Lisa