cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Bluetooth

Anonymous
Not applicable

Hello

just want to know where actually the INT of sensors (for example LPS25H - INT1 pin 7 is stated that connected to TP12)  in .pdf file

where actually those (TP8,9,10,11,12,15,16) are connected to BCM20737S or aren't we using them those INT ?

thanks in advance...

Regards

Sid

https://community.broadcom.com/servlet/JiveServlet/previewBody/1642-102-4-1655/WICED_SENSE_Schematic...
0 Likes
1 Solution
JacobT_81
Employee

Hi rsiddhanth​,

The interrupts from the sensors aren't connected to the chip, they're only brought out as test points.

There are some free GPIO brought out as test points on that board which can be fly wired to any interrupt's test point.

Jacob

View solution in original post

2 Replies
JacobT_81
Employee

Hi rsiddhanth​,

The interrupts from the sensors aren't connected to the chip, they're only brought out as test points.

There are some free GPIO brought out as test points on that board which can be fly wired to any interrupt's test point.

Jacob

View solution in original post

Anonymous
Not applicable

thank you very much for clarifying my doubt, jakewtorres...

Regards

Sid

0 Likes