cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Bluetooth

Anonymous
Not applicable

j.t

Per the discussion here: BCM20736S Sleep Example Firmware

Did you manage to get to the bottom of the 200uA in deep sleep?  I am seeing the same issues as well.

0 Likes
1 Solution
MichaelF_56
Moderator
Moderator

We have not. One of the problems is that the existing TAG3 board and WICED Sense are not reliable platforms for current measurements.  We are developing a new platform locally that leverages a much better ground plane and possesses the ability to isolate other circuitry on the board, but until it comes out, detailed current measurements will be difficult to achieve.

View solution in original post

0 Likes
2 Replies
MichaelF_56
Moderator
Moderator

We have not. One of the problems is that the existing TAG3 board and WICED Sense are not reliable platforms for current measurements.  We are developing a new platform locally that leverages a much better ground plane and possesses the ability to isolate other circuitry on the board, but until it comes out, detailed current measurements will be difficult to achieve.

View solution in original post

0 Likes
Anonymous
Not applicable

Hello Chad,

From the developers:

Please look at the following post: http://community.broadcom.com/message/14115#14115

Thanks

JT

0 Likes