- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am powering an Intel Arria 10 FPGA and am using your power demo board design as a starting place: https://www.infineon.com/cms/en/product/promopages/Altera/
Is there a recommendation for a different IR MOSFET than the IR3555-IR3557 to use with the IR35204? These FETs are obsolete or unavailable.
Thanks,
Dan
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Thanks for posting at Infineon Community.
We recommend you to go with the IR35204 Controller + TDA21472 Power stage.
Please note below points
1. TDA21472 and IR3555-IR3557 Footprints are not identical.
2. Functionally fine-tuning is necessary with TDA21472.
Regards,
SPCH.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Thanks for posting at Infineon Community.
We recommend you to go with the IR35204 Controller + TDA21472 Power stage.
Please note below points
1. TDA21472 and IR3555-IR3557 Footprints are not identical.
2. Functionally fine-tuning is necessary with TDA21472.
Regards,
SPCH.