PSoC™ Creator & Designer Forum Discussions

How do you delete watchpoints in PSoC Creator?  In debug mode they are not selectable and right click does nothing.  When not in debug mode the windows does not appear.

I am following the psoc 6 101 tutorials and came across an issue when running the capsense example project. I noticed that there are compile errors when generating the application with a capsense component. I traced it back to a missing variable in the "cy_stc_syspm_callback_params_t" structure in the "cy_syspm.h" file. Reintroducing the variable fixes the project, but it gets deleted every time I generate the application. I am currently using PSoC Creator 4.4 and Peripheral Driver Library 3.1.3.

How do you delete watchpoints in PSoC Creator? 

They seem to be locked and not deleteable when in debug mode and the watch window can't be opened when not in debug mode?

Hi to everyone

I'm looking for a FOC motor control using PSOC 6.

I've using CY8CKIT-042 kit and the CY8CKIT-062-BLE board.

The problem is that when i'm using the FOC sensorless example, changing the pins (that are designed using PSOC 42 pioneer kit) to CY8CKIT-062-BLE pins (thinking on arduino compatible pin), i have an error (Unable to place component "\Opamp_B:cy_mxs40_opamp\". Either the design is bigger than this chip can handle, or the design is over-constrained and there are not enough resources to satisfy the constraints.)

I have tried many pin configurations, but they all cause problems and the code does not compile. Also i'm changed the code to compatibility with PSOC 6. Can you help me with that?

Here is my code

I have a bunch o' MiniProg3 programmers that were attached with Velcro to ATE hardware. When removed the label on the back of the MiniProg3 adhered to the Velcro, not to the programmer.

How can I tell which of these are rev B and which are rev C MiniProgs when there's no label on the back?

Is there a way to tell revision by looking in the Windows 10 registry when the programmer is connected via USB? Is there a better/easier way?

Also, a RFE (request for enhancement) to PsOC Programmer: ADD DISPLAYING PROGRAMMER REVISION.

More a question of curiosity and personal education: Why does the first (5th, 9th, etc..) Shift Register placed on a schematic consume 2 Status Cells? I had assumed up to this point that Status Cells == Status Registers, but there is obviously more to it than that.

TIA,

-Terry

Hi,

Any plans to open source Kitprog3 and the host side for the neat usb-bridges for uart/i2c etc. (preferably as a libusb based python lib).

Thx

Hi,

I started working with PSOC 6 in creator 4.4. The problem is that no matter what program I want to build, even a program from the examples, I get the same error:

"An internal error occurred in the fitter: (System.UnauthorizedAccessException: Access to the path 'C: \ Users \ dvirs \ Documents \ PSoC Creator \ 4.4 \ Examples \ Design01.cydsn \ codegentemp \ bitstream.txt' is denied.)"

"Unable to open the file for writing. Access to the path 'C: \ Users \ dvirs \ Documents \ PSoC Creator \ 4.4 \ Examples \ Design01.cydsn \ codegentemp \ warp_dependencies.txt' is denied."

I saw the answer received at Missing files  but that did not solve my problem.

Anyone have the solution?

Thanks,

Dvir