PSoC™ Creator & Designer Forum Discussions
Hello
I have got a problem with psoc designer. When I press F6 ( generate/build my project ) i get these errors:
-----------------------------------------------------------------------------------------------------------------------------
Starting MAKE...
creating project.mk
name translation failed on C:/PROGRA~1/Cypress/PSoC\ Designer/5.2/Common/CypressSemiBuildMgr - 3
name translation failed on C:\PROGRA~1\Cypress\PSoC - 2
name translation failed on Designer\5.2\Common\CypressSemiBuildMgr\tools\include\CY8C29000 - 3
lib/adcinc.asm
!E lib/adcinc.asm(21): file 'm8c.inc' not found in current directory or in include path(s)
!E ADCINC.inc(14): file 'm8c.inc' not found in current directory or in include path(s)
!E lib/adcinc.asm(197): no such mnemonic 'M8C_SetBank1'
!E lib/adcinc.asm(200): no such mnemonic 'M8C_SetBank0'
!E lib/adcinc.asm(229): no such mnemonic 'M8C_SetBank1'
!E lib/adcinc.asm(232): no such mnemonic 'M8C_SetBank0'
C:\PROGRA~1\Cypress\PSoC Designer\5.2\Common\CypressSemiBuildMgr\tools\make: *** [lib/obj/adcinc.o] Error 1
C:\PROGRA~1\Cypress\PSoC Designer\5.2\Common\CypressSemiBuildMgr\tools\make: *** Deleting file `lib/obj/adcinc.o'
Example_CharacterLCD_User_Module - 8 error(s) 0 warning(s) 02:29:42
Hi, I have been trying to create a new project using the CY8C20160-SX2I but I cant find the chip part number. Is there any way to update the PSoc Components library or should I peek up another one of the same family ?
Show LessHome > Design Support > Cypress Developer CommunityTM > Cypress Forums > PSoC® 4 > PSoC4 equivalent doc to AN58827?
The above displayed at top of page when looking at a specific thread, but this applies to any thread.
If one clicks Cypress Forums or PSoCr 4 it takes you back to main forum page. The last
link however should return you to the PSOC 4 forum.
Regards, Dana.
Show LessI deleted the Programmer directory without uninstalling and now I can't
install PSoC Creator 3.0. It tells me Programmer is already installed.
So, I have to go to the registry and try to find all of the entries I need to delete.
Does Cypress have a tool that performs a full uninstall of all of the components?
Thanks,
-Ryan
Show LessHi,
Quadrature Decoder function SetCounter() does not accept negative values (positive values are fine).
Example:
QuadDec_SetCounter(-1); //can't set counter to a negative value
sprintf(strMsg1,"counter_val=%d \r\n", QuadDec_GetCounter() );
SW_Tx_UART_PutString(strMsg1);
reading counter value in the above example returns -32767.
What I want is to limit counter values to some bounds, e.g. -100...+100.
Regards,
odissey1
QuadDec_v2_30 (16bit)
Show LessA suggested addition to component, an output that is the clock used
to generate the waveform, and an equivalent for wc1/wc2 for the
start of the waveform.
Regards, Dana.
Show LessIn the API description the following appears -
cystatus Em_EEPROM_Write (const uint8 srcBuf[], const uint8 eepromPtr[], uint16/uint32 byteCount)
This indicates the source buffer must be in code memory, which would not be generally useful.
In fact if the srcBuf[] is declared as a RAM location, not as const, the module works fine. So
this appears to be a datasheet error.
I have not checked the other datasheets, probably typed with same error.
Note this is also compounded by GCC after 2.5 (I gather) requiring the _attribute modifier be used
for placing stuff in code memory/FLASH. Which would make the const uint8 eepromPtr[] also typed wrong ?
Even though typed that way it does work. The open source compiler curse in action ?
Regards, Dana.
Show Less