cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC™ Creator & Designer

Anonymous
Not applicable

Hi Everyone,

   

I'm fairly new to the PSoC creator. I'm working with the PSoC 5LP develeopment kit. Attached to this message is my project I am working on to use a switch to turn on a LED but to also use that same switch to turn off the LED and turn on another after holding that LED for 4 seconds. I set up a design that I'm most confident will work, with a debouncer to a counter. 

   

The issue I am having is with the main.c that I am building. If I use the debouncer sperately I can toggle the LED on and off with the switch easily, but with the counter connected I seem to lose this capability. Also i cannot seem to get the other LED to turn on after 4 seconds. PLS HELP. 

0 Likes
2 Replies
Bob_Marlowe
Expert II

Obviously not an accidental double post. Follow up here, please www.cypress.com/

   



 

0 Likes
ETRO_SSN583
Esteemed Contributor

Quintuple post, go here -

   

 

   

http://www.cypress.com/?app=forum&id=2492&rID=88574

   

 

   

Regards, Dana.

0 Likes