cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC™ Creator & Designer

stgac_3781621
New Contributor

MiniProg3 is working with the PSoC Programmer. MiniProg4 communicates with the PSoC Programmer in almost exactly the same way with one exception. The Voltage Setting, however, is grayed out. With MiniProg3 my target powered, but with MiniProg4 my target does not get powered. The Target Power status LED doe not light on MiniProg4. It would seem by the grayed out control and this LED not lighting, my PSoC Programmer/MiniProg4 is not delivering target power. Does anyone know how to change this?

Installed CyInstaller Products:

Bridge Control Panel  1.18.0.3121

Clock Programmer  1.8.0.3121

Device Database  3121

Example Code  3121

PSoC Programmer  3.27.1.3121

USB Bootloader Application  3121

CY4541 CCG4 Daughter Card

0 Likes
1 Solution
GeonaP_26
Moderator
Moderator

Please use MiniProg4 with latest PSoC Programmer 3.28.1 ​or Cypress Programmer depending on the device.

Programer.PNG

View solution in original post

0 Likes
1 Reply
GeonaP_26
Moderator
Moderator

Please use MiniProg4 with latest PSoC Programmer 3.28.1 ​or Cypress Programmer depending on the device.

Programer.PNG

View solution in original post

0 Likes