PSoC™ 6 Forum Discussions

Actually, the code was developed on the modus toolbox 2.4 version but it is showing an error in modus toolbox 3.0 while building the code.

So, how to solve the problem on that with an exact procedure?

                           /********************************** ERROR******************************************/

C:/Users/User name/ModusToolbox/tools_3.0/make/start.mk:31: *** This application uses an older build flow (from version 2.1 or earlier) that is not supported in this version of ModusToolbox. Please view KBA236134 in the Infineon Developer Community for instructions on updating your application.  Stop.

                      /*********************************** ERROR*****************************************/

Hi,

  we are trying to send data to the SQL server using CY8CPROTO-062-4343W PSOC6 WIFI-BT PROTOTYPING KIT. We had used Web server code and key_ch04b_ex06_httpbin_post code . when code got downloaded , WIFI is getting connected successfully through via HTTP webpage. After we are trying send post request to SQL server that time the request is not getting send .could you please help me to sort out this issue. What are the possible requirements that  we have to take to implementing this project 

Hi,

We plan to power VBACKUP signal on with a supercap (which is charged via 100 ohm resistor) on a project using PSOC6 (running at 3V).

It appears that while the supercap is charging the UART on P0 voltages are low as a result we can't communicate with the device on the initial power up. Although, its only a minute or so, but it affects our production testing.

My understanding was that backup domain would use VBACKUP or VDDd (which ever is higher), where VDDd is set to 3V.

When calling Cy_SysPm_BackupGetSupply(), it returns CY_SYSPM_VDDBACKUP_DEFAULT (which should have selected VDDd if it is present).

Am I missing something else in the configuration?

Dear colleague, 

I am working on a project where I am using the CY8CKIT - 062 PIONEER KIT , my project is versioned and every thing is working fine ( compilation, libraries, BSP ..) , until I changed my laptop.

I pulled the project from the server to continue working on ( knowing that I re-generate the mtb_shared libs using the library manager) and just after that the problem of the 'unresolved inclusion' starts. I tried to fix this using the indexer update and so on but nothing is useful! 

An other think that I want to mention here, is that when I create a new project based on the 'empty project template' the same problem occurs. 

Thank you for your help . 

Reagrds, 

Hi,

I'm working on a project with the region cy_em_eeprom is on CM0p because BLE is on this core.

I want to access the same region from CM4 to fix a production defects writing ble data from CM4.

Is that possible and how?

Thanks

Hi All,

Is CYW43455 chip support mesh topology for Wi-Fi communication?

Thanks 

Hi Myself HEMANTH, 

Currently I'm working on PSOC6 Evaluation board. Actually we have project on REVERSE OSMOSIS WATER PURIFIER by SIM Chip rechargeable and data also we need to store by using EEPROM with wifi configuration will connect our eval board through our main hardware board codes need to flash and store the data and that data need to send cloud server(
main server) by using PHP Server for that we have dashboard of domain  in that we need to operate. 

with is project shall anyone knows means just ping me i will contact you can help us.

Our Basic details

PSOC6 Bsps

CY8CPROTO-062-4343W

IC:- CY8C624ABZI-S2D44

Radio chip: LBEE5KL1DX (CYW4343WKUBG)

Flow meter

These are we are using basic components

if anything need to ask please contact us:

mail id:- hemanthpappu831@gmail.com

@RAMAKRISHNA 

Thanks & regards

Hemanth pappu