PSoC™ 6 Forum Discussions

Hello!
Currently I am finishing my graduate thesis on PSoC 063 BLE and Modus Toolbox software!
I need some documents for the report. However I can't find them exactly:
+ Block Diagram and Structure of PSoC 063 BLE and PSoC 6 BLE family
+ PSoC 063 BLE works with Bluetooth Low Energy
+ Power saving of PSoC 063 BLE
I found some developer documentation, but it doesn't fit what I need. If anyone knows exactly what I'm looking for please help!
Thank you!

Hi,

I am developing a BLE Central application that connects to up to 4 Peripheral devices. So far, I have the scanning, connections, and disconnections working. I still have to develop the code to deal with custom notifications that are sent by the Peripherals.

However, if I establish a set of connections, and then do nothing more, after 30 seconds I get a CY_BLE_EVT_TIMEOUT event with a reason code of CY_BLE_GENERIC_APP_TO. What could be causing this?

Kind regards,

Peter

我想问的时在M4运行在150M的情况下，SPI是否可以运行到25M的最高速

谢谢

Dear Receiver，

About "mtb-example-psoc6-switching-power-modes" example code in the MTB。

We found there is a big current consumption difference between sample code 2.2 and 3.0 in their deep sleep mode。

（Please refer to the attached file 1.)

deep sleep mode in V2.2 is about 0.002mA

deep sleep mode in V3.0 is about 2.6mA

The current measure point is shown as the attached file 2. Please also refer to it。

We feel confused why a big current consumption difference between V2.2 and V3.0，

Thank you so much。

Hi, 

I have DFU running in CM0 and  Application running in CM4.

I want to restart the PSOC , both cores, How to do it programmatically.

Regards,

Madhav

Hi Team,

I am using the CY8CKIT43012 board for my development and I am reading the input 5kHz V in SAR ADC. I have taken reference from https://github.com/Infineon/mtb-example-psoc6-sar-adc-simultaneous-sampling example. And I have configured the SAR ADC in the single-ended mode for pin 10.0, I am using an external Vref(1.65V) source and taking the samples at the PWM capture compare event. (At 1 MHz) And set the sampling frequency as 1MSPS. But I am not getting proper output. I am getting proper output for 3.3V, GND, and 1.65V but I am not able to reconstruct the sine wave of 5kHz.

(Environment: Modustoolbox version 3,  Implemented above functionality in Empty App). I have attached my sample code. Please let me know what am I missing.

I am using PSoC6 with BLE to control some rf switches. I am new and learned a lot of the code from the PSoC6-101 videos on youtube. 

I keep getting the following issue Build error: 'configMAX_SYSCALL_INTERRUPT_PRIORITY' undeclared (first use in this function) I know it has to do with FreeRTOS

I have attached the project. 

Any help will be great. 

Hi guys,

I am fairly new with psoc and modustoolbox, but i am having trouble debugging applications.

I am using the 'Wi-Fi Web Server' Application at the minute and keep getting the same error when debugging the application. It seems to be happening for all Bluetooth and Wi-Fi applications. 

The errors can be seen below, any help would be greatly appreciated, thanks!