cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 6

NaBa_3434861
New Contributor

I have a CY8C6136BZI-F14 and I'm trying to program the chip.

Using the KitProg3 (firmware updated using PSoC Programmer) reports the following error:

There was an error while programming the device: PSoC Programmer reported error (100 - PSoC Device (6B A0 24 77) is not in the DataBase)

Are there any fixes for this?

0 Likes
1 Solution
ShipingW_81
Moderator
Moderator

If you have installed the latest version PSoC Programmer (v3.28.5)https://www.cypress.com/products/psoc-programming-solutions ?

If the KP3 fw along with v3.28.5 is still not effective, please refer to the comment on the following thread - CYBLE-222014-00 - PSoC Device (1A 6B 11 AA) is not in the DataBase

View solution in original post

0 Likes
1 Reply
ShipingW_81
Moderator
Moderator

If you have installed the latest version PSoC Programmer (v3.28.5)https://www.cypress.com/products/psoc-programming-solutions ?

If the KP3 fw along with v3.28.5 is still not effective, please refer to the comment on the following thread - CYBLE-222014-00 - PSoC Device (1A 6B 11 AA) is not in the DataBase

View solution in original post

0 Likes
Top labels