cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC™ 6

user_1669321
Contributor II

Hi,

I'm looking at the process of blowing the eFuse during production, and it's mentioned in AN221111 that "Also, the supply voltage VDDD must be set to 2.5 V to program eFuse". Our module is powered with a 3.3V LDO. What would happen if VDDD is 3.3 instead of 2.5? Could we still blow the eFuse?

Thank you,

Fred

0 Likes
1 Solution
user_1669321
Contributor II

From the datasheet, it's between 2.38V and 2.62V, so 2.5 is indeed required.

I just tested programming a PSoC using the Miniprog3's voltage at 2.5V while the PSoC's LDO was off and it worked, so it seems I can bypass my 3.3V problem this way.

View solution in original post

0 Likes
1 Reply
user_1669321
Contributor II

From the datasheet, it's between 2.38V and 2.62V, so 2.5 is indeed required.

I just tested programming a PSoC using the Miniprog3's voltage at 2.5V while the PSoC's LDO was off and it worked, so it seems I can bypass my 3.3V problem this way.

View solution in original post

0 Likes
Top labels