cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1

alma_284856
New Contributor II
0 Likes
4 Replies
himam_31
Employee

 Hello 

   

It is not recommended to connected CMOD value on the SWD pins. This will affect the programmimg.

   

 

   

Thanks,

   

Hima

0 Likes
alma_284856
New Contributor II

 So what do you suggest?

0 Likes
Anonymous
Not applicable

Hi,

   

If you are using SWD (and not JTAG) protocol for programming, then the pins P1[3] and P1[4] are free. There is XRES pin on the chip which is connected to JTAG 10-pin connector, hence P1[2] is also free. Therefore, you can use any of the pins P1[2], P1[3] and P1[4] to connect CMOD capacitor.

0 Likes
alma_284856
New Contributor II

Thank you I will use SWD 😉

0 Likes