question about ant pin

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

hi fellas

   

i soldered one PSOC4-BLE chip on my PCB, and just one chip no other components

   

and i found that pin-12 ant was short-circuited to GND

   

i want to know if it's normal or my chip might damaged from inside

   

 

   

thanks all

0 Likes
1 Solution
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received
        I don't have access to the die pictures so I will give you an answer from years of experience in RF testing and design . RF pins are generally at gnd when tested with an ohm Meter.   

View solution in original post

0 Likes
1 Reply
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received
        I don't have access to the die pictures so I will give you an answer from years of experience in RF testing and design . RF pins are generally at gnd when tested with an ohm Meter.   
0 Likes