cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC™ 4

PeSw_2288441
New Contributor

Hi

I would like to used the BLE pa_en functionality on a CYBLE_214015 module to trigger an interrupt.

Is there anyway to achieve this? (See attached project for my attempt)

Regards

Pete

0 Likes
1 Solution
Yugandhar
Moderator
Moderator

Hello Pete,

The pin P5[0] is not connected for CYBLE214015 module so it is not possible to use pa_en. Please see page no.14 in the BLE component datasheet where it was mentioned that the power amplifier enable (pa_en) output allows you to connect a high active external power amplifier to the device. This output can be routed to the P5[0] digital output pin only.

Thanks,

P Yugandhar.

View solution in original post

0 Likes
3 Replies