cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC™ 4

ramkumarkoppu
New Contributor

As per the CY8CKIT-048 product page, latest PSOC could not be used to develop firmware for this kit to evaluate PSOC Analog Coprocessor. If that is the case, how the firmware development for PSOC Analog Coprocessor can be done using hardware development kit? I would like to evaluate PSOC Analog Coprocessor as a front end for STM32 based device.

0 Likes
1 Solution
MotooTanaka
Esteemed Contributor

Hi,

Since the kit is not supported in PSoC Creator 4.2 or later revision as stated in the kit's page below.

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-048-psoc-analog-coprocessor-pio...

 

I think that you need to download earlier revision such as PSoC Creator 4.1 or PSoC Creator 4.1 Update 1 from  the following URL.

https://www.cypress.com/documentation/software-and-drivers/psoc-creator-software-archive

 

Although I have not tried that kit, I hope that the kit should be supported in PSoC Creator 4.1 Update1.

 

moto

View solution in original post

0 Likes
1 Reply
MotooTanaka
Esteemed Contributor

Hi,

Since the kit is not supported in PSoC Creator 4.2 or later revision as stated in the kit's page below.

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-048-psoc-analog-coprocessor-pio...

 

I think that you need to download earlier revision such as PSoC Creator 4.1 or PSoC Creator 4.1 Update 1 from  the following URL.

https://www.cypress.com/documentation/software-and-drivers/psoc-creator-software-archive

 

Although I have not tried that kit, I hope that the kit should be supported in PSoC Creator 4.1 Update1.

 

moto

View solution in original post

0 Likes