cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC™ 4

Anonymous
Not applicable

I'm designing an app that connects to a sole Bonded device and while connected will broadcast a non-connectable, whitelist-only advertisement to up to 8 different devices.

   

 Is the Bonded device stored in the same maximum-8 array, so that I would have to remove the bonded device address before populating the whitelist address?  

   

If so, after removing the bonded address, populating the whitelist, advertising, and clearing the whitelist, how would I add the bonded device back to the bonded list for future connecting would StoreBondedDevices still apply and would/could I call it during connection or after disconnect?

   

I'm using component 3.10 and noticed in the docs that CyBle_GapRemoveDeviceFromWhiteList removes all devices, bonded and whitelist, but a parameter to allow them to be removed separately isn't available with this version.  Is it a future release, or is it dependent on chip?

   

 

   

Thank you.

0 Likes
1 Solution
Anonymous
Not applicable

Hi,

   

As of now, removing the devices separately from whitelist and bonding is not available.

   

Regards,

   

-Madhu Sudhan

View solution in original post

0 Likes
1 Reply
Anonymous
Not applicable

Hi,

   

As of now, removing the devices separately from whitelist and bonding is not available.

   

Regards,

   

-Madhu Sudhan

View solution in original post

0 Likes