cancel
Showing results for 
Search instead for 
Did you mean: 

Nor Flash

toyac_1469256
New Contributor II

Q1: WP # terminal

If Quad command or Write protection is not used in the host system, the WP# pin can be left open, but is there a problem with using the WP# pin fixed at VDD (3.3 V)?

Q2: RESET # terminal

If Quad command or Reset is not used in the host system, the RESET# pin can be left open, but is there a problem with using the RESET# pin fixed at VDD (3.3 V)?

0 Likes
1 Solution
Anonymous
Not applicable

Hello Yamakoshi San,

You can connect  WP# and RESET# pin to VDD (3.3V) . There will not be any problem as long as you are not going to use those pins.

Thanks,

Krishna.

View solution in original post

0 Likes
2 Replies
Anonymous
Not applicable

Hello Yamakoshi San,

You can connect  WP# and RESET# pin to VDD (3.3V) . There will not be any problem as long as you are not going to use those pins.

Thanks,

Krishna.

View solution in original post

0 Likes
toyac_1469256
New Contributor II

Hello Krishna San,

Thanks for your reply.

0 Likes