Motor Control ICs Forum Discussions
Hi @SarkarSushru @SarkarSushru
Thanks for reply "how to program imc102T-F064 with FlashPro – iMOTION (X2S) relates from Elprotronic company "
I used iMOTION_SD_V5.03.07.sdpack
This programmer is (FlashPro–iMOTION(X2S)) compatible with SD_V5.03.07.sdpack ?
Show Less
My uc is TC367,and Tle9183 communicates with it through SPI. I read the SPI STATUS FLAG ,and the data is 0x06.and we know,spi status flag has 5 bit,so 0x06 means "config valid" and "warning".
my question is how to locate the specific warning info?
ps: i have checked values of the registers from 0x40 to 0x4D,but no warings been found.
Show LessCan you dynamically change the baud rate of the serial port by setting the FDR and BRG registers after the serial port is initialized?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/%E7%94%B5%E6%9C%BA%E6%8E%A7%E5%88%B6%E8%8A%AF%E7%89%87/IMC300A-%E6%B3%A2%E7%89%B9%E7%8E%87%E8%AE%BE%E7%BD%AE/td-p/501653
Show Less
Hi,
I have a scope picture regarding the catch-spin function. The yellow channel represents the Vbus voltage, while the pink channel represents the motor current of one phase. When I start the motor at low speed, the catch-spin function works correctly. The motor current is nearly zero, and the bus voltage remains normal.
However, when I start the motor at high speed, the motor current does not quickly reach zero, causing the bus voltage to rise and eventually reach the over-voltage level. If the bus voltage reaches a critical over-voltage level, the motor phase becomes shorted, and the current becomes uncontrolled, as depicted in the following scope picture.
I want to know if there is any way to better utilize the catch-spin function to avoid high-speed overvoltage faults. All of this relates to the "Forward catch-spin" function. My application involves an industrial fan.
Show Less
如题,我是用EVAL_IMD700A_FOC_3_Shunt和BPA软件调试电机,但是电机负载稍微大一点就会失步,电流大不起来,我该调整那些参数呢?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/%E7%94%B5%E6%9C%BA%E6%8E%A7%E5%88%B6%E8%8A%AF%E7%89%87/%E5%BA%94%E7%94%A8MCU%E5%AF%B9IMC102T%E5%92%8CIMC301A%E7%9A%84%E7%BC%96%E7%A8%8B%E9%97%AE%E9%A2%98/td-p/497033
Show Less1、The schematic diagram of the evaluation board downloaded from the website is completely inconsistent with the evaluation board, as shown below, please send a schematic diagram consistent with the evaluation board.
2、Please give the parameters of the evaluation board switching power supply output, the size of 15V and 3.3V output current.
3.Please give the parametric design method of auxiliary switching power supply, especially the calculation of switching transformer.
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/%E7%94%B5%E6%9C%BA%E6%8E%A7%E5%88%B6%E8%8A%AF%E7%89%87/EAL-M1-IM818-A%E8%AF%84%E4%BC%B0%E6%9D%BF%E4%BD%BF%E7%94%A8/td-p/492195
Show Less