Legacy microcontrollers Forum Discussions

Hi,

    客户是win7 64bit系统，直接安装驱动很困难，让客户全部卸载之后，直接安装softune 3021版本，成功安装驱动，但后来又安装了一款离线烧写器驱动之后，MB2146-07无法正确连接，重新安装驱动也不能用，但是设备管理器里显示MB2146-07正常，实际上无法连接仿真器。重新安装softune3021也不行，请问这种情况如何解决？谢谢！

Hi All,

This is Madhusoodana Bairy from Mistral Solutions, Bangalore.

We are in need of 4 Lane or 2 Lane LVDS to CSI Converter Chip.

Whether the company supports this kind of chipset or any low end CPLDs/FPGAs which will do this job ?

Thanks.

Best Regards,

Madhusoodana Bairy

I've read S6J3300 Hardware manual and it says that the family 3300 supports hyperbus, but not specify which if them actually can?

Dear  Cypress:

      After checked the 32-bit_Microcontroller_FM3_Peripheral_Manual_Main_Part_TRM.pdf , we can't find the detail discription, can you help to provide ? tks'

Q.

I want to drive a three-phase brushless motor (one) and a brush motor (two) using CY9BF524L.

For example,

I think it can be realized by using a multi-function timer (PPG timer:3ch) for the brushless motor and using PWM (2ch) for the brush motor.

Is this understanding correct?

Best Regards,

Harukawa/TED

---------------------------------------------------

Q.

CY9BF524Lを使って三相ブラシレスモータ(1つ)とブラシモータ(2つ)を駆動させたい。

例えば、

ブラシレスモータは多機能タイマ(PPG:3ch)を使用し、

ブラシモータをPWM(2ch)を使うことで実現できると思います。

この理解は正しいですか。

I'm having the following error:

Error[Li005]: no definition for "Mfs_Uart_Init" [referenced from C:\Users\rcorder1\Documents\IAR Embedded  Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH  Debug\Obj\main.o] Error[Li005]: no definition for "Mfs_Uart_Write" [referenced from C:\Users\rcorder1\Documents\IAR Embedded  Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH  Debug\Obj\main.o] Error[Li005]: no definition for "Mfs_Uart_Read" [referenced from C:\Users\rcorder1\Documents\IAR Embedded  Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH  Debug\Obj\main.o] Error while running Linker

I'm trying to "merge/combine" the ADC and UART examples for Cypress s6j3200

Using Windows 10, IAR Arm 8.50.1

Build log:

Building configuration: single_irq_sw - TCFLASH Debug Updating build tree... Linking ilinkarm.exe C:\Users\rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\ S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH Debug\Obj\adc12b.o C:\Users\rcorder1\Documents\IAR  Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\ TCFLASH Debug\Obj\exceptions.o C:\Users\rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\arm\ 8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH Debug\Obj\flash_marker.o C:\ Users\rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\ examples\adc12b\single_irq_sw\TCFLASH Debug\Obj\interrupts.o C:\Users\rcorder1\Documents\IAR Embedded  Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH  Debug\Obj\main.o C:\Users\rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\ s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH Debug\Obj\mfs_uart.o C:\Users\rcorder1\ Documents\IAR Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\ single_irq_sw\TCFLASH Debug\Obj\pdl.o C:\Users\rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\ arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH Debug\Obj\port.o C:\Users\ rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\ adc12b\single_irq_sw\TCFLASH Debug\Obj\start.o C:\Users\rcorder1\Documents\IAR Embedded Workbench\ GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH Debug\Obj\ startup.o C:\Users\rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\ S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH Debug\Obj\sysctrl.o C:\Users\rcorder1\Documents\IAR  Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\ TCFLASH Debug\Obj\Traveo_template_version.o --no_out_extension -o C:\Users\rcorder1\Documents\IAR  Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\ TCFLASH Debug\Exe\single_irq_sw.out --redirect _Printf=_PrintfFullNoMb --redirect _Scanf=_ScanfFullNoMb --map  C:\Users\rcorder1\Documents\IAR Embedded Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\ examples\adc12b\single_irq_sw\TCFLASH Debug\List\single_irq_sw.map --config C:\Program Files (x86)\IAR  Systems\Embedded Workbench 8.4\arm\config\linker\Cypress\s6j33xDx.icf --semihosting --entry  __iar_program_start --vfe --text_out locale    IAR ELF Linker V8.50.1.245/W32 for ARM    Copyright 2007-2020 IAR Systems AB. Error[Li005]: no definition for "Mfs_Uart_Init" [referenced from C:\Users\rcorder1\Documents\IAR Embedded  Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH  Debug\Obj\main.o] Error[Li005]: no definition for "Mfs_Uart_Write" [referenced from C:\Users\rcorder1\Documents\IAR Embedded  Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH  Debug\Obj\main.o] Error[Li005]: no definition for "Mfs_Uart_Read" [referenced from C:\Users\rcorder1\Documents\IAR Embedded  Workbench\GPIO & ADC\arm\8.50.1\Cypress\s6j3200\S6J3260Evl\examples\adc12b\single_irq_sw\TCFLASH  Debug\Obj\main.o]   8'058 bytes of readonly  code memory   1'214 bytes of readonly  data memory   3'390 bytes of readwrite data memory Errors: 3 Warnings: none Link time:   0.08 (CPU)   0.06 (elapsed) Error while running Linker Total number of errors: 3 Total number of warnings: 0 Build failed.

I am using MB96F388HSBPMC-GE2 MCU in one of our project. I want to know what will happen exactly (or what will be the impact) if I use a 1 uF ceramic capacitor as smoothing capacitor at C pin instead of the datasheet recommended minimum value of 3.5 uF?

Thanks.