In my application, I need to use an output pin for two functions. I need it as a normal output and control it from firmware and then at the correct time, have it function as the output of a timer (PWM) to modulate a signal.
I have three questions:
How do I Force a timer in a PSoC Creator (4.3) schematic to use a specific base timer, eg. BT3. I need this as the TIOA output is assigned to a specific pin that I need to use.
How do I flip the output between a firmware controlled state or under timer output control?
Why can I assign TIOA1_1 to pin 7 but not TIOA1_0 to pin 11 as per the documentation? I use the S6E1A12C0AGV20000 chip.
I may be missing something on the use of the PWM timer, but cannot figure out what.
You can find all available code examples for FM0+ in PSoC Creator 4.3 through navigating to File -> New -> Project -> FM0+/S6E1A1 -> Code example
However, we DO NOT recommend FMx devices for any new appalication, as the current technical support resources are very limited. In stead, PSoC device has much more code example and tech support resources in PSoC Creator.