Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob

Solve "Error service launch sequence" for debugging in DAVE™ IDE

Solve "Error service launch sequence" for debugging in DAVE™ IDE

IFX_Publisher2
Community Manager
Community Manager
Community Manager
25 likes received 1000 replies posted First like given

If you get an error in service launch sequence while debugging in DAVE™ IDE as shown in Figure 1, then follow the workaround to resolve the error.

Figure 1: "Problem Occurred: Error service launch sequence 

BinduPriya_G_1-1656929453490.png

How to solve the error in service launch sequence while debugging in DAVE™ IDE?

 

Follow this steps to workaround the error that appears while debugging in DAVE™ IDE:

  1. Verify that you have installed Segger JLink.
  2. If you have not changed the installation path during DAVE™ setup, then the Segger JLink.exe files are in the default location C:\Program Files\SEGGER\JLink_V510l
  3. Verify that your debugger is configured as shown in Figure 2.
  4. Restart Dave™ and debug the code.

Figure 2:  Debugger configuration window

BinduPriya_G_0-1656929365859.png

 

 

Community Translation: サービス起動シーケンスのエラーの回避策 - KBA235677 (XMC™ DAVE)™

Version: **

0 Likes
704 Views