
Moderator

Moderator
Feb 15, 2021
02:05 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
I am studying SiC diodes for a PFC circuit in Commercial AC 7HP. I want to compare SiC Diode with Si Diode.
Can you check the following diode's trr value ?
IDWD30G120C5
IDW30G65C5
IDW40G65C5
Thanks!
Can you check the following diode's trr value ?
IDWD30G120C5
IDW30G65C5
IDW40G65C5
Thanks!
Solved! Go to Solution.
- Tags:
- IFX
1 Solution
Moderator

Moderator
Feb 17, 2021
11:20 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Hi Fränce,
at first please doublecheck the voltage class you need. In the list of devices you have one 1200 V diode and two 650 V devices.
On your question in regard to trr: Contrary to Si-diodes SiC-Schottky diodes have no significant reverse recovery effect at all. Therefore a trr-value is not needed for loss calculation. The only mechanism contributing to switching loss is the capacitive charge Qc. Information on Qc is provided in the datasheet.
There are several application notes available for PFC-solutions in different topologies.
Best regards,
electricuwe
at first please doublecheck the voltage class you need. In the list of devices you have one 1200 V diode and two 650 V devices.
On your question in regard to trr: Contrary to Si-diodes SiC-Schottky diodes have no significant reverse recovery effect at all. Therefore a trr-value is not needed for loss calculation. The only mechanism contributing to switching loss is the capacitive charge Qc. Information on Qc is provided in the datasheet.
There are several application notes available for PFC-solutions in different topologies.
Best regards,
electricuwe
1 Reply
Moderator

Moderator
Feb 17, 2021
11:20 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Hi Fränce,
at first please doublecheck the voltage class you need. In the list of devices you have one 1200 V diode and two 650 V devices.
On your question in regard to trr: Contrary to Si-diodes SiC-Schottky diodes have no significant reverse recovery effect at all. Therefore a trr-value is not needed for loss calculation. The only mechanism contributing to switching loss is the capacitive charge Qc. Information on Qc is provided in the datasheet.
There are several application notes available for PFC-solutions in different topologies.
Best regards,
electricuwe
at first please doublecheck the voltage class you need. In the list of devices you have one 1200 V diode and two 650 V devices.
On your question in regard to trr: Contrary to Si-diodes SiC-Schottky diodes have no significant reverse recovery effect at all. Therefore a trr-value is not needed for loss calculation. The only mechanism contributing to switching loss is the capacitive charge Qc. Information on Qc is provided in the datasheet.
There are several application notes available for PFC-solutions in different topologies.
Best regards,
electricuwe