Looking for Bluetooth module recommendation

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Robd
Level 1
Level 1
First reply posted First question asked Welcome!

Requirements are:

  • Receive A2DP stereo Bluetooth audio from a mobile device
  • Audio I2S interface
  • Built in processor
  • Bluetooth 5 radio (BT5 not necessarily required)
  • Pre-certified module: FCC and Bluetooth SIG
  • BLE not required
  • Plug and play with minimal or no software development required
0 Likes
1 Solution
AnjanaM_61
Moderator
Moderator
Moderator
5 comments on KBA First comment on KBA 5 questions asked

Hello @Robd 

Please have a look at our BT/BLE chips CYW20721B2 & CYW20706 for audio solutions . Please have a look at : https://www.cypress.com/products/airoc-bluetooth-le-bluetooth

You can use our chips in two modes - either in controller only mode ( in which you need to use HCI commands via HCI UART of device ) or embedded mode (in which you can download a application developed in Modus Tool box IDE). We do have example projects for A2DP sink . So it will be easy for you to use our products. 

I would suggest you to contact one of our local FAE for quick help.

Regards,

Anjana 

View solution in original post

0 Likes
3 Replies
AnjanaM_61
Moderator
Moderator
Moderator
5 comments on KBA First comment on KBA 5 questions asked

Hello @Robd 

Please have a look at our BT/BLE chips CYW20721B2 & CYW20706 for audio solutions . Please have a look at : https://www.cypress.com/products/airoc-bluetooth-le-bluetooth

You can use our chips in two modes - either in controller only mode ( in which you need to use HCI commands via HCI UART of device ) or embedded mode (in which you can download a application developed in Modus Tool box IDE). We do have example projects for A2DP sink . So it will be easy for you to use our products. 

I would suggest you to contact one of our local FAE for quick help.

Regards,

Anjana 

0 Likes
Robd
Level 1
Level 1
First reply posted First question asked Welcome!

Thank you Anjana, can you tell me how to contact an FAE for support with this application?

0 Likes
AnjanaM_61
Moderator
Moderator
Moderator
5 comments on KBA First comment on KBA 5 questions asked

Hello @Robd ,

Sorry I missed your response. 

You may try reaching through the below sales offices -  https://www.cypress.com/about-us/sales-offices

Regards,

Anjana

0 Likes