How to connect XMC4500 with Yamaha YMW259-F GEW9

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
I have done the same project in Poland cheap electronic keyboard instrument on cheap and available in china IC-F GEW9 YMW259 wavetable generator and do not quite know how to connect with GEW9 XMC4500 (YMW259-F), standard yamaha uses microcontrolleres RENESAS H8 their obsolete electronic keyboard PSR 5700 / PSR6000, but they do not have support for touch screen color and the FLASH memory
if any of you know
How to connect Infineon XMC4500 with IC - Yamaha YMW259-F (GEW9)

it seems that the data bus and address are parallel in YMW259-F


we plan to open a factory in Poland, cheap keyboards and trying to get funding grants from the European Union
we want to use your microcontrollers well as in most devices electronic keyboard music instruments high ends and studio equipments
our production, so that the factory in Germany's Infineon in Dresden is near the Polish, we have an assured outlet for thousands of units in the European Union.
We want XMC4500 also use to control multi-effects there parameters the IC - FV 1
http://www.spinsemi.com/products.html
and FV1 control the USB to device for the save presets efect in USB Stick memory , USB to host the connect and control the computer , SD card used the save presets efects ,
and UART port XMC4500 for MIDI interface for send efect bulk dump system exclusive efect pdata packet , and midi clock controler for timing delay efects
see webpage my project : http://www.e-studio.org.pl/index.php/modernizacje-lokomotywy/projekt
details of my projects in Polish - you can use the google translate
and my pcb designer cooperants www.atsystem.net.pl
Poland does not want to use any other microcontrollers in our factory keyboards than Infineon XMC4500, because there's nothing like German precision
We have orders for thousands of pieces of European Union we want to use our equipment xmc4500
0 Likes
4 Replies
Travis
Employee
Employee
First solution authored Welcome! 500 replies posted
Hi tfanatic,

Sorry to say that you need to be more precise and detailed in your questions. It would be better if you can understand the interface of the Yamaha IC such as using I2C, UART, CAN etc before we can suggest anything.

Best Regards
Travis
0 Likes
Not applicable
it seems that the data bus and address are parallel in YMW259-F


we plan to open a factory in Poland, cheap keyboards and trying to get funding grants from the European Union
we want to use your microcontrollers well as in most devices electronic keyboard music instruments high ends and studio equipments
our production, so that the factory in Germany's Infineon in Dresden is near the Polish, we have an assured outlet for thousands of units in the European Union.
We want XMC4500 also use to control multi-effects there parameters the IC - FV 1
http://www.spinsemi.com/products.html
and FV1 control the USB to device for the save presets efect in USB Stick memory , USB to host the connect and control the computer , SD card used the save presets efects ,
and UART port XMC4500 for MIDI interface for send efect bulk dump system exclusive efect pdata packet , and midi clock controler for timing delay efects
see webpage my project : http://www.e-studio.org.pl/index.php/modernizacje-lokomotywy/projekt
and my pcb designer cooperants www.atsystem.net.pl
Poland does not want to use any other microcontrollers in our factory keyboards than Infineon XMC4500, because there's nothing like German precision
We have orders for thousands of pieces of European Union we want to use our equipment xmc4500
0 Likes
Not applicable
See the picture manual , the main CPU is the original old solution GEW8 with old microcontroller Renesas/Hitachi - H8 family
[1698.attach
1699.attach
0 Likes
Travis
Employee
Employee
First solution authored Welcome! 500 replies posted
Hi,

I just PM you.
0 Likes