XMC™ Forum Discussions

[Stéphane]

Hello,

I'm working on XMC1200 with J-Link.

During development no problem the micro controller works and I can debug BMI (SWD0)
however for production I need to program the XMC1200 with memtool and when I flash the Hex file (same directory as the ELF file) BMI (ASC) & flash process succesfull. the micro remains inactive even with reset as if there was no program (however I have well data in the hex file!)

Thanks for your support

[LinglingG_46 · Accepted solution]

 Please use the BMI tool in dave to change the chip BMI from the ASC to SWD0, then the code will run.

[Stéphane]

Thanks, I'll try