Wi-Fi connection(to wireless LAN AP) is lost immediately after 11 hours past with WPA3-SAE. We think it was caused due to Wi-Fi module is down. It's not disconnected by wireless AP. And we have already tried other wireless LAN AP from several vendors, and we confirmed that the same issue was reproduced in every case. However, if we choose WPA2-PSK, the issue doesn't happen. Wi-Fi connection is still alive after 11 hours past.
Can I use linux firmware for WICED BT stack? I am trying launch AP6256 with WICED, WiFi already working and I used firmware from linux dist. Now I wou...
Can I use linux firmware for WICED BT stack? I am trying launch AP6256 with WICED, WiFi already working and I used firmware from linux dist. Now I would like run RFCOMM, I can download firmware(also from linux) but after it I can't see correct communication, after analizing sources, as I can see, wiced_hci_read_thread expected packet started from 0x19, as I undertand WICED using custom commands for communication. Right? WICED using own "handmake" bluetooth firmware and other firmware are not suitable for WICED BT?
We found the strength of BT signal to be too lowAs suggested by FAE, want to load path to fix this problemBut after setting the patch, it is found t...
We found the strength of BT signal to be too low As suggested by FAE, want to load path to fix this problem But after setting the patch, it is found that the patch should still not be loaded successfully Is it correct to put .hcd in /etc/firmware path? If patch not found is displayed, what is the possible reason?