wpa_supplicant connect issue

[jach_2064941]

Dear

i have some question about wpa_supplicant and wl command

1: how many AP that can get from wl scan and wl scanresults

   i only can get 16 APs after exec wl scan and wl scanresults but there are 30 AP in my office

2: i get some error after use wpa_supplicant but i can use wl command to connect AP success (wl join AP open)

netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPE[dhd-wlan0] wl_escan_set_scan : LEGACY_SCAN
R_DORMANT)
Daemonize..
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : Escan set error (-16)
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : error (-16), cnt=1
[dhd-wlan0] wl_escan_set_scan : LEGACY_SCAN
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : Escan set error (-16)
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : error (-16), cnt=2
[dhd-wlan0] wl_escan_set_scan : LEGACY_SCAN
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : Escan set error (-16)
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : error (-16), cnt=3
[dhd-wlan0] wl_escan_set_scan : LEGACY_SCAN
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : Escan set error (-16)
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : error (-16), cnt=4
[dhd-wlan0] ESCAN-ERROR) wl_escan_set_scan : Send disassoc to break the busy
[dhd-wlan0] wl_escan_set_scan : LEGACY_SCAN
[dhd-wlan0] wl_escan_set_scan : LEGACY_SCAN
[dhd-wlan0] wl_escan_set_scan : LEGACY_SCAN

thanks

james

[vaibhav_rp]

Hi @jach_2064941 ,
To help us understand the setup better, can you please tell following details:

1) Chip used for bring-up?

2) Firmware/Driver version used?

3) please share us the wpa_supplicant.conf file used

Regards

Vaibhav

[vaibhav_rp · Accepted solution]

This thread was moved to myCases.