- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am using bcm4343w wifi driver for imx6 solo board. But I got following isssue when i try to do insmod bcmdhd.ko.
because of that i can't able to start wpa_supplicant service.
root@sabreauto_6q:/data/local/tmp # insmod bcmdhd.ko
dhd_module_init in
Power-up adapter 'DHD generic adapter'
dummy_sdmmc: probe of mmc1:0001:1 failed with error -110
dummy_sdmmc: probe of mmc1:0001:2 failed with error -110
wifi_platform_bus_enumerate device present 1
failed to power up DHD generic adapter, 3 retry left
wifi_platform_bus_enumerate device present 0
mmc1: card 0001 removed
wifi_platform_bus_enumerate device present 1
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (6 bytes)
mmc1: new high speed SDIO card at address 0001
imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
imx-spdif sound-spdif: snd_soc_register_card failed: -517
imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
imx-spdif sound-spdif: snd_soc_register_card failed: -517
F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x3
imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
DHD: dongle ram size is set to 524288(orig 524288) at 0x0
imx-spdif sound-spdif: snd_soc_register_card failed: -517
wifi_platform_get_mac_addr
CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211)
wl_create_event_handler(): thread:wl_event_handler:4d8 started
CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xc91a147c
dhd_attach(): thread:dhd_watchdog_thread:4d9 started
dhd_attach(): thread:dhd_dpc:4da started
dhd_deferred_work_init: work queue initialized
Dongle Host Driver, version 1.141.88 (r)
Compiled from
Register interface [wlan0] MAC: 00:90:4c:11:22:33
CFG80211-ERROR) wl_event_handler : was terminated
wl_destroy_event_handler(): thread:wl_event_handler:4d8 terminated OK
dhd_prot_ioctl : bus is down. we have nothing to do
imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
imx-spdif sound-spdif: snd_soc_register_card failed: -517
root@sabreauto_6q:/data/local/tmpimx-spdif sound-spdif: ASoC: CPU DAI (null) not registered
# imx-spdif sound-spdif: snd_soc_register_card failed: -517
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi divyesh_2238111
from logs it seems your driver is not compiled properly for your platform.
what steps did you followed ?
Please use the latest release and try following the document.
BR,
Aman
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
1) After the modules is loaded could you execute "wl ver" that will tell you whether the module is loaded.
2) What is the firmware that you are using ?
3) Did you run the install script as mentioned here?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Divyesh,
Is the problem resolved ?
please respond
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi divyesh_2238111
from logs it seems your driver is not compiled properly for your platform.
what steps did you followed ?
Please use the latest release and try following the document.
BR,
Aman