- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Can wl tool create a hotspot AP? If so, can i have an example please.
Best regards.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello:
./wl down
./wl apsta 0
./wl up
./wl ap 1
./wl chanspec 36/40 // this means channel and HT40
./wl ssid “test”
./wl bi 10000
./wl dtim 10
./wl bss up
./wl status
by the way what is your OS ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello:
./wl down
./wl apsta 0
./wl up
./wl ap 1
./wl chanspec 36/40 // this means channel and HT40
./wl ssid “test”
./wl bi 10000
./wl dtim 10
./wl bss up
./wl status
by the way what is your OS ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello ZhengbaoZ_96;
Thank you for your response.
I'm using The Cypress CYW89359 (a.k.a. BCM89359) in an Android 8.1 board.
The commands works perfectly but i have some questions :
Can you explain me why using this 2 commands with theses values ?
- ./wl bi 10000
- ./wl dtim 10
The Ap "test" is displayed but i can't connect to it (stuck at Obtaining address ip), how can i assign ip address to client ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
bi is the meaning of beacon interval.
DTIM is teh Delivery Traffic Indication Message interval.
please use:
ifconfig wlan0 192.168.0.1
after the commands.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I already did that, and nothing changed.
Should i activate a dhcp server ? if so, how ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
like below commands:
ifconfig wlan0 192.165.100.1
iptables -P INPUT ACCEPT
iptables -D INPUT 6
dnsmasq --pid-file=/data/dnsmasq.pid --interface=wlan0 --dhcp-range=192.165.100.2,192.165.100.200 --listen-address 192.165.100.1