- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a camera that transfer data using USB3.0 interface.
Which series of device can be used for the purpose?
If the device is not only used to receive data from the camera, but also process the frame, and response it by controlling the motor, which device satisfy this usage?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Unfortunately, we do not have any device that can support your application requirement.
Best Regards,
AliAsgar
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We essentially provide two variants of USB superspeed peripheral controllers for interfacing a USB 3 camera with different camera interfaces.
For a camera with MIPI CSI interface, we provide EZ-USB CX3, which is a programmable MIPI CSI to USB 3 camera controller. More details on this product can be found here :https://www.infineon.com/cms/en/product/universal-serial-bus-usb-power-delivery-controller/periphera....
For cameras with interfaces other than MIPI CSI, we provide EZ-USB FX3, a superspeed peripheral controller. More details on this product can be found here :https://www.infineon.com/cms/en/product/universal-serial-bus-usb-power-delivery-controller/periphera....
More details on your application with FX3 can be found in this application note :https://www.infineon.com/dgdl/Infineon-AN75779_How_to_Implement_an_Image_Sensor_Interface_with_EZ-US....
Both these products will satisfy your requirements.
Best Regards,
AliAsgar
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I do not think CX3 satisfy the requirement, because the camera's interface is USB3.0, not MIPI. Do you agree my conclusion?
As to FX3, If FX3 connect the camera, Does FX3 should be used as the host? it get the image from the camera and process the data inside FX3. Does FX3 satisfy this application?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I hope FX3 be the host, I do not have PC or any other processor in my system.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Can you share with me the datasheet of the USB 3 camera?
I can give more comments once I have the datasheet.
Also do let us know what type of processing of frames is needed on the device side?
Best Regards,
AliAsgar
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Unfortunately, we do not have any device that can support your application requirement.
Best Regards,
AliAsgar