- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I have a Cypress FX3.0 chip and I would like to install the driver "USB Bootloader" for it.
I already installed the EZ FX3 SDK and I also installed the driver of the chip through the device manager.
my problem is I cannot select the "USB Bootloader" as the driver.
and I cannot see any device in the device tree of the USB control Center.
So, what should I do next?
Thx in advaced,
Shixiang
Solved! Go to Solution.
- Labels:
-
USB Superspeed Peripherals
- Tags:
- driver usb fx3
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please let me know which boot mode i.e. status of PMODE lines is used for your application.
The device should be configured for USB Boot (PMODE[2:0] = Z11) for the device to come up as "Cypress FX3 Bootloader Device".
Please confirm that the latest SDK is installed from the following link FX3 SDK
Rashi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please let me know which boot mode i.e. status of PMODE lines is used for your application.
The device should be configured for USB Boot (PMODE[2:0] = Z11) for the device to come up as "Cypress FX3 Bootloader Device".
Please confirm that the latest SDK is installed from the following link FX3 SDK
Rashi