- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi all,
I have a task of operating BIST on Cypress(CYUSB3014-BZXC) embedded controller. Commands are operated from PC via USB.
Please help me to do it step by step, from the point of view of hardware (if any steps are necessary) and software.
The test is online, means that after completing BIST Cypress has to return to regular operations without system rebooting or communication channels reestablishing.
I have seen in the Cypress documentation that there is a limited BIST supported - only for high speed communication channels. I did not see that any BIST is mentioned for other peripherals, memory, etc.. May be I simply did not see the the relevant information. I have to have maximum functionality available.
Anyway I do not understand how to operate BIST, then get the results and return to operational mode.
Please advise.
Thank you in advance,
Roman
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Roman,
Unfortunately, FX3 does not support BIST for every peripheral etc
Rashi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Roman,
Unfortunately, FX3 does not support BIST for every peripheral etc
Rashi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Rashi hello.
Thank you for the quick answer.
Anyway are there any BIST for FX3 and if the answer is yes then how to operate it?
Roman
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please let me know which BIST is needed for your application
Rashi