- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi can anyone, help me with blinking led code for CY7C63813(low speed USB 2.0 peripheral controller) psoc designer
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You can toggle an LED by connecting it to a GPIO and driving GPIO in main.c by configuring it as output pin in PSoC Designer and writing to PxData register where "x" is the port number.
You can use timer to have some delay between toggling. MSTimer user module datasheet - https://www.cypress.com/documentation/user-module-datasheets/user-module-datasheet-1-millisecond-int...
Pranava
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You can toggle an LED by connecting it to a GPIO and driving GPIO in main.c by configuring it as output pin in PSoC Designer and writing to PxData register where "x" is the port number.
You can use timer to have some delay between toggling. MSTimer user module datasheet - https://www.cypress.com/documentation/user-module-datasheets/user-module-datasheet-1-millisecond-int...
Pranava