- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi!
We are looking at designing and active cable with redriver (e.g. TI, TUSB544 USB TYPE-C™ 8.1 Gbps Multi-Protocol Linear Redriver | TI.com ).
There is the CCG2 EVK and reference design which looks ok, but where to we find a suitable source code? The CCG2 projects in the SDK all looks to be targeted powerbanks, laptops etc. Not EMCA? In the CY4502 SW we only see binary versions of the firmware?
Could you provide some pointers for us?
Cheers
Olof
so it is something like this we are looking at.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Olof,
CCG2 have capabilities to handle this application. If you are interested in this type solution, please feel free to contact Cypress local marketing to get details information.
So far, Cypress do not have plan to release firmware SDK for EMCA application. Thank you for your understanding.
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Olof,
CCG2 have capabilities to handle this application. If you are interested in this type solution, please feel free to contact Cypress local marketing to get details information.
So far, Cypress do not have plan to release firmware SDK for EMCA application. Thank you for your understanding.
Best Regards,
Lisa