When CYPD5225 enters deep sleep mode ,it keeps this mode only for 3 seconds ( current：800 uA) and then restart（current：8mA）。
Q1：Why does it keep deep sleep mode only for 3 seconds and then restart?
Q2:Entering sleep mode , current is 800 uA, is it right? If not, what is the appropriate value？
Log as follows.
1. As per the log you share, I guess you mentioned CCG5 entered deep sleep mode 3 seconds, this case is Type-C attached and CCG5 is sink. Am I correct?
If yes, the specification you shall be referred is below as per condition of your firmware setting:
2. From the log you shared, It seems that time slot from 22:02:47.098 have a interrupt and sink path disabled. If this is true case, CCG5 shall be wake up to handle this event.
Thanks for your response.
1. The CCG5 is sink but the case is not type-c attached.
2.How can I do to modify firmware setting as per the specification you mentioned above?
3.Does the restart situation confirm the device has already entered deep sleep mode？
4.How can I printf log to gain the reason which causes restart ？