- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can any one tell me how can i open the protocol analyzer utility for the CY4532 EZ-PD CCG3PA, or the analyzer utility ?
I have downloaded all the files asked but still i can open it.
If any one have a manual guide or files it will be very helpful.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Yes, You will need a CY4500 EZ-PD Protocol Analyzer kit to capture the traffic between 2 PD devices. CY4500 Analyzer acts as a PD sniffer and displays the PD packets as well as present voltage and current on the Type-C port. You can buy an Analyzer from the following link https://www.cypress.com/documentation/development-kitsboards/cy4500-ez-pd-protocol-analyzer
CY4532 is an Evaluation kit meant to evaluate the capabilities of CCG3PA chip. CY4532 kit supports a Type-C and a Type-A port and is used to evaluate Power Adapter and Power Bank applications.
Please do refer to following documentation to explore the usage of CY4532 EVK.
EZ-PD Configuration Utility - Used to Configure CY4532 Kit. You can modify PDOs advertised by Type-C port, Thresholds for Over Voltage and Over Current conditions, Legacy charging protocols etc. Please refer to User Guide for further information on usage.
CCG3PA Datasheet - Datasheet of the chip present in the CY4532 kit.
CY4532 Kit Documentation - Documentation related to CY4532 EVK.
Please do let me know if you need further information.
Best regards,
Pranava
Pranava
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
EZ-PD Protocol Analyzer Utility captures PD traffic between PD devices and works with CY4500 EZ-PD Protocol Analyzer kit. You can find User Guide of same in the below link,
https://www.cypress.com/documentation/development-kitsboards/cy4500-ez-pd-protocol-analyzer
Can you please confirm if you are referring to the same?
Regards,
Pranava
Pranava
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I have only the CY4532 EZ-PD and CY4532 EZ-PD, do i need the CY4500 EZ-PD Protocol Analyzer kit to capture the traffic?
I downloaded the software for CY4500 EZ-PD Protocol Analyzer but still nothing.
It's my first time using this kit so any suggestion will be a good help.
Thank you
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Yes, You will need a CY4500 EZ-PD Protocol Analyzer kit to capture the traffic between 2 PD devices. CY4500 Analyzer acts as a PD sniffer and displays the PD packets as well as present voltage and current on the Type-C port. You can buy an Analyzer from the following link https://www.cypress.com/documentation/development-kitsboards/cy4500-ez-pd-protocol-analyzer
CY4532 is an Evaluation kit meant to evaluate the capabilities of CCG3PA chip. CY4532 kit supports a Type-C and a Type-A port and is used to evaluate Power Adapter and Power Bank applications.
Please do refer to following documentation to explore the usage of CY4532 EVK.
EZ-PD Configuration Utility - Used to Configure CY4532 Kit. You can modify PDOs advertised by Type-C port, Thresholds for Over Voltage and Over Current conditions, Legacy charging protocols etc. Please refer to User Guide for further information on usage.
CCG3PA Datasheet - Datasheet of the chip present in the CY4532 kit.
CY4532 Kit Documentation - Documentation related to CY4532 EVK.
Please do let me know if you need further information.
Best regards,
Pranava
Pranava
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can also refer to the Appnote regarding CCG3PA. https://www.cypress.com/documentation/application-notes/an218179-getting-started-ez-pdtm-ccg3pa
Pranava
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you, very kind off you for all the information. I will take the CY4500 EZ-PD Protocol Analyzer kit in this days.
One more think, if is possible.
I'm using a CYPD3175-24LQXQ for my board, and i was looking on PSoC Creator and there no code examples for this kit.
Do you know where i can find an example code for CYPD3175-24LQXQ ?
Thank you again.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Please install CCGx Power SDK.https://www.cypress.com/documentation/software-and-drivers/ez-pd-ccgx-power-software-development-kit
CY4532 kit contains CYPD3171-24LQXQ and can run CYPD3171_cla and CYPD3171_pb projects from the SDK.
For CYPD3175 part, CYPD3175-24LQXQ_pa_direct_fb project can be used.
Please refer to Power SDK guide for elaborate explanation on its usage.
Best regards,
Pranava
Pranava