cancel
Showing results for 
Search instead for 
Did you mean: 

USB EZ-PD™ Type-C

Anonymous
Not applicable

Hi,

  How to get current active PDO profile used by ccg2 device either in source or sink mode through HPI interface, we added Sink pdo 5V@3A, 9V@3A, 12V@3A, 15V@3A, 20V@3A and Source 5V@3A ,12V@3A , we tried to read 0x24 and 0x25 registers respond with values 0x1F and 0x01 respectively.

we tired to read CURRENT_PDO from ccg2  in sink mode responds with value  0x1003C12C, what this value represents.

Thanks,

Nagaraj

0 Likes
1 Solution
ShifangZ_26
Moderator
Moderator

Hi Nagaraj,

For question about HPI, the concerned topics are not suitable for discussing in the community here, please contact your local Cypress/Cypress distributor for your help.

The 0x1003C12C is the PDO format, You can refer PD2.0 PDO format to get details defines.

Best Regards,

Lisa

View solution in original post

0 Likes
1 Reply
ShifangZ_26
Moderator
Moderator

Hi Nagaraj,

For question about HPI, the concerned topics are not suitable for discussing in the community here, please contact your local Cypress/Cypress distributor for your help.

The 0x1003C12C is the PDO format, You can refer PD2.0 PDO format to get details defines.

Best Regards,

Lisa

View solution in original post

0 Likes