We are using the i2c to communicate with a slave. The slave needs a second address byte for reading, see attached picture:
Our problem is that, after the slave address with read-command is sent, the i2c master changes to the receive mode (I2C_STATUS.M_READ = 1). The second address byte can not be sent to the slave.
Is there a possibility that the second address byte can be sent to the slave?
Thanks for your help in advance
It appears that the requirement is to read two byte address. But TVII SCB-I2C module don't support the special 2-byte read mode. You may need to choose to use 1-byte read mode or emulated software I2C driver to support it.