Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
autoUser
Level 1
Level 1
5 questions asked 10 sign-ins 5 replies posted

Hi,

we are evaluating the TRAVEO T2G CYTVII-C-2D-6M-327-SET evaluation board and want to use the I²C feature of the Traveo MCU. Unfortunately we cannot find any pin on that evaluation board we might use for I²C communication. Also we cannot find any documentation for this board in the web. Could you please tell us how we can use I²C on that evaluation board?

Thanks!

0 Likes
1 Solution
Imam_M
Moderator
Moderator
Moderator
25 solutions authored 50 replies posted 10 likes received

Hi @autoUser,

T2G CYTVII-C-2D-6M-327-SET evaluation board has an I2C feature in it and there are I2C pins on the hardware. Kindly you can check on the T2G CYTVII-C-2D-6M-327 User Guide in MyICP.

If you're not registered in MyICP, you can register yourself by following the steps mentioned on this link https://www.infineon.com/cms/en/product/microcontroller/#!details then send an email to Traveo@infineon.com. You will receive a response with further instructions.

I hope this helps.

 

Thank you.

View solution in original post

0 Likes
1 Reply
Imam_M
Moderator
Moderator
Moderator
25 solutions authored 50 replies posted 10 likes received

Hi @autoUser,

T2G CYTVII-C-2D-6M-327-SET evaluation board has an I2C feature in it and there are I2C pins on the hardware. Kindly you can check on the T2G CYTVII-C-2D-6M-327 User Guide in MyICP.

If you're not registered in MyICP, you can register yourself by following the steps mentioned on this link https://www.infineon.com/cms/en/product/microcontroller/#!details then send an email to Traveo@infineon.com. You will receive a response with further instructions.

I hope this helps.

 

Thank you.

0 Likes