[CYBT-343026-01] EZ-Serial version confirmation

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi Everyone

It seems that the host side FW will need to be updated as the version of EZ-Serial changes in the End-Customer's environment.
They would like to check the current version of EZ-Serial, can you tell me how to do it?


Thanks
Yang

0 Likes
1 Solution
Owen_Zhang123
Moderator
Moderator
Moderator
5 questions asked 500 solutions authored 250 sign-ins

The FW version is in the boot message. Please check chapter 2.2 in the user guide about it:

https://www.infineon.com/dgdl/Infineon-EZ-Serial_WICED_Firmware_Platform_User_Guide_for_CYW2070x-bas...

You can also use the command system_query_firmware_version (/QFV, ID=2/6) to get the FW version. The detail information is in 7.2.2.6 of the user guide.

View solution in original post

0 Likes
4 Replies
Owen_Zhang123
Moderator
Moderator
Moderator
5 questions asked 500 solutions authored 250 sign-ins

The FW version is in the boot message. Please check chapter 2.2 in the user guide about it:

https://www.infineon.com/dgdl/Infineon-EZ-Serial_WICED_Firmware_Platform_User_Guide_for_CYW2070x-bas...

You can also use the command system_query_firmware_version (/QFV, ID=2/6) to get the FW version. The detail information is in 7.2.2.6 of the user guide.

0 Likes
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi Owen

I confirmed that you have given the link.

I got the below message.

[The page cannot be found.]

 

Can you please check the link again.

Thanks

Yang

0 Likes
YoJa_3107936
Level 5
Level 5
Distributor - Macnica (Japan)
100 sign-ins 50 sign-ins First like given

Hi Owen

YoJa_3107936_0-1639699390856.png

Can you please check the link again.

Thanks

Yang

 

 

0 Likes