- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Team,
How to configure the SPI clock speed SCLK=50000 Hz for a master (clkSpeed parameter in the function wiced_hal_pspi_init()) when the CYW20719 uses a 24 MHz crystal oscillator (XTAL)?
We need SCLK=50 kHz for communication with a specific pressure sensor. In the existing FW (WICED 6.2) is not possible to set the SPI clock less than 187 kHz for a master (limited by FW).
Thanks,
Ruslan
Solved! Go to Solution.
- Tags:
- spi clock
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Rulsan,
You are correct , you can't configure the SPI clock for 50kHz. The minimum you can set is 187kHz.
Thanks,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Rulsan,
You are correct , you can't configure the SPI clock for 50kHz. The minimum you can set is 187kHz.
Thanks,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Anjana,
What about synchronize the SPI with an internal oscillator. Can we?
Thanks,
Ruslan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Unfortunately, that would not be possible.