BCM92073X_LE_KIT Schematics, Layout, Firmware

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
35_Engineering
Level 4
Level 4
First like received 10 sign-ins 10 questions asked

Can anyone please point me to Schematics and Layout (Gerber and CAD source) for the BCM92073X_LE_KIT??


BCM92073X_LE_KIT.png


BCM92073X_LE_KIT



Thank You!

JB.

0 Likes
1 Solution
Anonymous
Not applicable

Hello johnnysax,

I just posted them to the forum:

BCM20737TAG Board - Gerbers and Schematics

I have a few more items to post, but that should get you started.

Thanks

JT

View solution in original post

8 Replies
35_Engineering
Level 4
Level 4
First like received 10 sign-ins 10 questions asked

This is referred to as the "TAG3" board in the HW documentation PDF.  But I need the source files so I can layout my board!

Thank You,

JB.

0 Likes
Anonymous
Not applicable

Hello Johnny,

We are working on publishing the files for the TAG3 board and will send you a link shortly.

JT

0 Likes

Hi JT,

What is your ETA for these files?  We need them urgently.

Thank You,

JB.

0 Likes

Hi JT,

It has been three (3) days now without a response?

When should I expect the files?

Thank You,

JB.

0 Likes
Anonymous
Not applicable

Hello johnnsax,

They are being released today - I will send you the link.

The Title of your post mentioned firmware.

Have you downloaded the SDK 1.0.1?

JT

0 Likes
Anonymous
Not applicable

Hello johnnysax,

I just posted them to the forum:

BCM20737TAG Board - Gerbers and Schematics

I have a few more items to post, but that should get you started.

Thanks

JT

False,

I am looking for BOTH schematic netlist and PCB source files in the source form.  I am trying to import them into Altium and layout a board.

The board I am looking for is:   BCM920732TAG_032

It looks like this:

Screen Shot 2014-05-22 at 5.11.44 PM.png

Again, I need both the layout source and the schematic netlist.

0 Likes

Sorry about the confusing naming convention, and stenciling JohnnySax!

Even though the board you show is stenciled with "BCM920732TAG_O32", it truly is a TAG3 board.  You may also sometimes see it called "TAG2" board, but that is really old terminology.

Basically there are three evaluation boards out there:

TAG_Q32 --- (Note: that is a 'Q', not an 'O') and is populated with the BCM20732 device (i.e. TAG2 board)

TAG3 -- populated with a BCM20737 device (i.e. TAG3 board)

SB-BLE-S02 PEVB --- populated with the BCM20732S module (SPIL Module EVB)

There is soon to be a "Sensor TAG" board that marries up the 20736/7 to a bunch of sensors.

Some folks have de-populated the TAG boards and put other chips on them based on what they are trying to cobble together.   For example, you can populate a SB-BLE-S02 PEVB with a BCM20736S module.