cancel
Showing results for 
Search instead for 
Did you mean: 

SRAM

AVNETsammy
New Contributor

According to Document Number: 001-79552 Rev. *O,POD is supported at VDDQ voltages of 1.1 V and 1.2 V nominal,Now customer's main-controller Intel Stratix 10 sx FPGA can just use POD 1.2V signaling,but CY7C4042KV13-933FCXC is a commercial part,in Operating Range we can see it can just use VDDQ=1.1V,if can CY7C4042KV13-933FCXC works with 1.2V VDDQ ?
BTW,If we must change to Industrial part,Now we can't find a registrable P/N,Please help advise, Many Thanks!

0 Likes
1 Solution
Roy_Liu
Moderator
Moderator

Both Industrial and Consumer parts can support VDDQ = 1.1v and 1.2V, you can just go ahead use the Consumer part with 1.2v VDDQ.

Roy Liu

View solution in original post

0 Likes
1 Reply
Roy_Liu
Moderator
Moderator

Both Industrial and Consumer parts can support VDDQ = 1.1v and 1.2V, you can just go ahead use the Consumer part with 1.2v VDDQ.

Roy Liu

View solution in original post

0 Likes